Sliders

The KPM 12G slider was developed since a third party product could not be found to meet the regulations of annex 10; as well as being unsightly.

As a result KPM developed a marinised unit with a travel of 150 mm. The slider uses axial bearings so a smooth sliding action is always ensured. In addition KPM noticed that it would be useful to adjust from the front and back! ,so we put it in

The product is made from aircraft grade aluminium and 316 stainless steel, to ensure that it will not corrode.

As such the KPM slider can be used externally . As with all KPM product the slider is fully repairable to reduce the lifetime cost of the unit

Swivels

The KPM seat swivel has been designed to satisfy the requirements of the marine industry and annex 10. In the process of designing the 12G seating system KPM could not find a third party unit that had been crash tested. As such KPM decided to design their own.

Manufactured from aerospace grade aluminium and 316 stainless steel this robust unit can be used externally with minimum of maintenance.

The unit can rotate 360 degrees in increments of 30 degrees. Activated by a low profile side handle the stainless steel bearings produce a smooth action without sticking. 

Pedestals

The KPM seat swivel has been designed to satisfy the requirements of the marine industry and annex 10. In the process of designing the 12G seating system KPM could not find a third party unit that had been crash tested. As such KPM decided to design their own.

Manufactured from aerospace grade aluminium and 316 stainless steel this robust unit can be used externally with minimum of maintenance.

The unit can rotate 360 degrees in increments of 30 degrees. Activated by a low profile side handle the stainless steel bearings produce a smooth action without sticking.